Mô tả

Corgi is an industrial-level laser/QR code navigation light indoor mobile robot that supports a maximum load of 100kg. The laser repeat positioning accuracy can reach ± 5mm. It is designed to optimize internal transportation in narrow and crowded industrial environment. It is small and flexible and easily passes through 660mm wide path, and capable of integrating with more than ten different top modules to apply to factory manufacturing, in-house logistics and security inspection.

Corgi-1L300 with the following basic parameter:

Dimensions: 800*619*330 mm
Maximum payload: 300 kg
Weigh: 200 kg
Maximum Speed: 1.5 m/s

Thông tin bổ sung

THƯƠNG HIỆU	YOUIBOT
TẢI TRỌNG	Tải trọng ≤ 300KG
KIỂU ĐIỀU HƯỚNG	Điều hướng SLAM Laser 2D
CHỨC NĂNG	Chở hàng

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Corgi-1L300” Hủy

Specifications

Corgi-1L300
Dimensions	800619330mm	Positioning accuracy	Positioning accuracy ：±5mm，Angle accuracy：±1°
Turning diameter	940mm	Drive wheel material/ Drive wheel dimensions	Polyurethane/ 150mm
Shell material	Cold-rolled steel	Cell material	Lithium iron phosphate
Weight	200KG	Battery voltage/ Battery capacity	48V/ 30Ah
Slope-climbing ability	4°	Running time	8H
Maximum payload	300KG	Charging time	≤1.5H
Maximum Speed	1.5m/s	Battery lifetime	Cycle life≥2000 times
Maximum rotation speed	180°/s	Charging mode	Automatic / Manual / Quick charging
Vertical Obstacle-climbing Ability	5mm	External power supply	48V
Ditch-crossing ability	30mm	Lidar	1 lidar is located on the front of the robot
Ambient temperature	5°C-40°C	Emergency stop button	2 on the both sides of the robot
Ambient humidity	Relative humidity 5 % -90 % (No condensation)	Collision detection	Located 360° around the robot;
Operating environment	No dust and no flammable , explosive and corrosive gases	Voice alarm	Optin
IP classification	IP20	Status indicatiors	3 around the robot
Cleanliness class	CLASS100	Start button/ Reset button	1 on the front of the robot
Coefficient of slip resistance	≥0.5	Manual / Auto switch button	1 on the side of the robot
Ground condition	Dry , level ground without oil and dirt	Manual charging interface	1 on the interface panel of robot
Minimum around flatness	FF25(*ACI117 standard)	Wireless network	IEEE 802.11 A/C
Navigation mode	Intergrated laser navigation	Ethernet port	2 on the interface panel of robot
Path planning	Vritual tracking / Independent planning	USB	1 on the interface panel of robot

Download

Vendor Information

No ratings found yet!

General Enquiries

There are no enquiries yet.

Corgi-1L300

Corgi-1L300

Sản phẩm mới

Sản phẩm bán chạy

Sản phẩm được đánh giá tốt nhất

Tư vấn

+84-9-1800-2204

hình thức thanh toán